Cookie Img
Home » Products » Water Filter Plant » Cooling Tower Water Filter

Cooling Tower Water Filter

Cooling Tower Water Filter
Cooling Tower Water Filter
Product Code : Shubham 31
Product Description

Cooling Tower Water Filter

Cooling towers recirculation water is large in volumes and gets easily contaminated with suspended solids, atmospheric dust, microbiological organisms, various airborne debris and sometime particulate of rusted metal coming out from heat exchanges. These contamination and impurities get settled either in cooling tower pond or deposit on the surface of Heat exchanges and significantly decrease the performance of cooling tower circuit. Under these circumstances, significant improvement might be realized with the use of a side stream filter and pond cleaning accessories. 

Our unique design of Side Stream Filter and cooling tower pond accessories ensures efficient & effective removal of suspended solids & other contaminations and reinforce healthy conditions of cooling tower and associated heat exchangers.

Shubham SSFs are available in diameters from 0.225 Mts. to 4.0 Mts.(vertically) and in length from 3.0 Mts. mm to 11 Mts. (Horizontally) with flow ratesup to 500M3/Hr. these rugged, pre-engineered, pre-assembled units minimize installation and start-up costs. 

Working Principle

Water from the system is pumped through the over drain assembly at the top of the filter tank and distributed evenly over the media. Suspended particles are trapped in the filter media. The filtered water then passes from the tank through the under drain assembly at the bottom of the filter and returns to the piping system. 


Type of Installation: -
  • Direct piping connection: - Inlet and outlet of SSF are directly connected to main stream pipe and utilize main stream pumps for further filtration process which eliminates the requirement of extra pumps  
  • Cooling tower pond Connection: - This type of installation need additional pump which is directly connected to cooling tower pond at suction side and feed water into SSF for further filtration process and filtered water goes back to the cooling tower pond at the opposite of pump suction.This recirculates entire pond volume and does not depend on main stream pump and its operation.
  •  TECHNICAL SPECIFICATIONS: 

Flow : 1M3/Hr. - 500 M3/Hr.
Inlet TSS : Up to 50 Mg/L
Inlet Turbidity : Up to 40 NTU
Filtration Velocity : 18 to 30 M3/Hr./M2
Diameter (Vertical Vessel) : 0.225 Mts. - 4.0 Mts.
Length (Horizontal Vessel) : 3.00 Mts. - 11.0 Mts.
MOC : FRP / Mid Steel / Stainless Steel 
Coating / lining : Epoxy / FRP / Rubber Lined
Filtration Rating : Up to 10 Micron
Design Code : ASME / IS
Design Pressure : Up to 10 Bar
Working Pressure : 1.1 to 3.5 Bar 
Clear Pressure Drop : 0.3 bar
Top distribution system : bell mouth
Bottom distribution system : Strainer plate or Header & laterals. 

APPLICATIONS

Cooling Tower & Process Water Treatment  

  • Turbidity & Total Suspended Solid Removal  
  • Side Stream Filter
  • Full Stream Filter
  • Make up water Filter